Sprinklers and Drip Emitters
Place sprinkler heads and set their fixture style, spray radius, and arc — and check coverage on the plan.
Sprinklers and Drip EmittersSprinkler places a watering head with a modeled spray sector. The fixture can represent a spray, rotor, emitter or micro-spray. Coverage geometry helps compare the intended reach; it does not simulate actual pressure, wind or soil watering.
Place the head
Open Water → Emitters & Heads → Sprinkler, then click its location. Select it to open the water Inspector.
Choose the fixture
Fixture Style offers Pop-up Spray, Pop-up Rotor, Gear Drive, Impact, Drip Emitter and Micro Spray. Select the intended appearance and head type.
Set coverage
In Spray Coverage, set Spray Direction, Spray Radius and Spray Arc. Numeric radius input accepts nonnegative values without a fixed upper limit; arc input accepts 0–360° in 1° increments. The sliders and common arc buttons are shortcuts, not the complete numeric input range.
Read and show the sector
Use Show Coverage Area to show or hide the modeled sector. The summary shows radius, arc and, when flow is configured, precipitation rate. Technical includes Precip. family. Use product data for these values.
Compare the plan
Review intended coverage and adjacent objects. Geometric overlap alone does not guarantee uniform watering. For tubing with repeated emitters, use a separate Dripline path and its spacing and demand fields.